Contact Us
06-10-2004, 07:48pm
I'm about to import a couple of swingarm extensions, they bolt on to your axle slot and add from 100-200mm to your wheelbase for drags or the long and low look .
Easy to change from short to long and back, but mods to the rear may be needed for clearance also the brake line needs to swing to face the rear on the brake master, and the riveted loop that stops the brake line rubbing your rim needs removing
Most bikes don't need this but if you do they will cost ~$300 on your doorstep , maybe less if i can get a better deal in larger numbers.
I'll get a photo of mine up so you can see what there like.
If anyone is interested let me know by the weekend at
mgwatters @ bigpond.com <i></i>
Easy to change from short to long and back, but mods to the rear may be needed for clearance also the brake line needs to swing to face the rear on the brake master, and the riveted loop that stops the brake line rubbing your rim needs removing
Most bikes don't need this but if you do they will cost ~$300 on your doorstep , maybe less if i can get a better deal in larger numbers.
I'll get a photo of mine up so you can see what there like.
If anyone is interested let me know by the weekend at
mgwatters @ bigpond.com <i></i>