Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED

Full Version: Stock Exhaust Mod
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi Everyone,

My son and I wanted to see how we could modify a stock exhaust on the 2014 Hayabusa 1300r without making it look suspicious.

First grind rivets on chrome cap. remove cap. cut through outer only - 15mm from end. then cut through whole muffler around 35mm from edge. see photos for additional bits.

[Image: ccW4UAu.jpg]

[Image: XAh8jXn.jpg]

[Image: nQPwuXs.jpg]


Then test cut through middle to determine where to cut behind pipe which connects the middle section. Once determined, cut behind the pipe (tape to determine even cut).

[Image: tqe7LhA.jpg]

[Image: WUlI6AX.jpg]

[Image: pClV9sz.jpg]

knock out welds on the plate inside.

http://someimage.com/291J8eF

http://someimage.com/mEQgjsx

http://someimage.com/aGn0iS4

Once out, should look like this.

http://someimage.com/2PZtaIP

Then push end section lip prepared earlier into the gap between inner and outer shell of now empty muffler.

http://someimage.com/bNa6s0U

http://someimage.com/qGmgohT

Make sure you clean out some heat insulation to be able to fit it correctly.

http://someimage.com/PEn1Vxl

http://someimage.com/H8oEUWs

Pop rivet chrome cap back on and then place 2 pop rivets each face to fix into the join and stop the end section falling off.

http://someimage.com/ey5VG37

http://someimage.com/HRDoqYV

http://someimage.com/xj4qJaq

Finished!!! Looks stock huh?

http://someimage.com/KjQPiTq

http://someimage.com/blB7hAz

http://someimage.com/c6gnziF

http://someimage.com/1lhz7aD
[Image: XAh8jXn.jpg]
hey gill,

when you are copy/paste links for pictures try the BB link rather than direct link and it will pop the picture right in there as my previous post did
(30-11-2015, 12:36pm)Batfink Wrote: [ -> ]hey gill,

when you are copy/paste links for pictures try the BB link rather than direct link and it will pop the picture right in there as my previous post did

Thanks mate, I did it on the first 6 as that is all that i'm allowed. Every time I go to insert more, it kicks it out saying 6 is the limit....
yeah.. there is a 1 post limit... but you can do multiple posts
Sadly all pics are gone and copy/past links are also did't work on new page