Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED

Im sure this has been asked before but
Is it possible to put a 340 kmh speedo on a later model busa?
0ne reliable source says no,but i say with money anything
can be done.

Anyone know of any that have been done?
Mines an 07.

Yep, have seen it done to a couple of 01 models, not cheap though. Another option is to replace face plates and use a speedo corrector.

How much roughly an who can you recommend to do it?

If you can find an instrument cluster good luck, last one I heard of was at Metropoitan motorcycle wreckers and I think they wanted something like $500. No experience with aftermarket face plates but others have done it and will hopefully chime in. The ones that Pan has are not easy to read at night.

Shitt... Hmm.

A speedo healer is about $145 and new after market faces start at arond $45 so for under $200 easy done send me a email if you need any more info

speedo healer
340 guages

BUSA-RO Wrote:A speedo healer is about $145 and new after market faces start at arond $45 so for under $200 easy done send me a email if you need any more info

not hard at all done my 06
first with the white faces then with the red ones

bandit Wrote:

BUSA-RO Wrote:A speedo healer is about $145 and new after market faces start at arond $45 so for under $200 easy done send me a email if you need any more info

not hard at all done my 06
first with the white faces then with the red ones

+1 I Have put the MPH one's on mine from Pet's Pit Stop
http://www.petespitstop.com.au/

pity richard has only seen wat 100mph is and not the 200mph hehehe

Dan85 Wrote:pity richard has only seen wat 100mph is and not the 200mph hehehe

Get it right you man Whore..it's 149.5mph so far

It was a piece of piss to fit an early instrument pod to my 2006. Got it from Garry (Hawkwind), fitted it a couple of weeks ago. Haven't fitted a healer yet. Rode beside Busdriver yesterday. His stock speedo was showing the same speeds my 2000 pod was showing.
We actually took the nose cone off (simple enough to do) to fit it. Don't know if the speeds will be consistant at the high end. Nice to have a 340 speedo though. Looks sweet.






More bling is always a good thing!


Max:ausflag::ausflag:

I love the guages bandit!
They look awesome!
WHered you get them from???

NEMESIS Wrote:I love the guages bandit!
They look awesome!
WHered you get them from???

They came from me i got them made in the UK it is best if you cut some lite white cardboard to put under them and take your stock ones off as the light shines through with original numbers
i dont no if max was doing any other work to his bike but you dont need to take nose cone of to get gauges out just take the two suronds from arond the gauges off and there is two 10mm bolts at bottom of gauges then gently pull on top of gauges to pull away from housing they will feel hard but they will come out then put your hand in behind gauges to unclip wire harness hope this helps.

All i know is that im not handy an there is no chance i can do it by myself,
thats when cash comes in lol.

NEMESIS Wrote:All i know is that im not handy an there is no chance i can do it by myself,

what part of vic you in im at lakeside pakenham would be happey to lend a hand