+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Head Job-K8-Needs A Polish & O/S Valves (/showthread.php?tid=13446)
Pages:
1
2
RE: Head Job-K8-Needs A Polish & O/S Valves - Camel - 10-10-2009
They must be good pictures.
RE: Head Job-K8-Needs A Polish & O/S Valves - GRUNTMAX - 10-10-2009
Try again......
[attachment=7692]
[attachment=7693]
[attachment=7694]
RE: Head Job-K8-Needs A Polish & O/S Valves - Camel - 10-10-2009
Oh. Sorry, I was expecting the head polisher.
RE: Head Job-K8-Needs A Polish & O/S Valves - GRUNTMAX - 10-10-2009
The Thai Head Polisher-----with more cloths on this time.
[attachment=7695]
The valve seat cutters
[attachment=7696]
RE: Head Job-K8-Needs A Polish & O/S Valves - GRUNTMAX - 14-10-2009
[attachment=7719]
[attachment=7720]
[attachment=7721]
[attachment=7722]
[attachment=7723]
[attachment=7724]
See ya
RE: Head Job-K8-Needs A Polish & O/S Valves - GRUNTMAX - 15-10-2009
Any chance of a boatload of Thai Head Polishers Mr Crudd ?
[attachment=7731]
[attachment=7732]
[attachment=7733]
RE: Head Job-K8-Needs A Polish & O/S Valves - GRUNTMAX - 18-10-2009
[attachment=7754]
[attachment=7755]
Even the Thai Head Polisher couldn't suck that hard
[attachment=7756]
RE: Head Job-K8-Needs A Polish & O/S Valves - Camel - 18-10-2009
You have noice toys there moite.
RE: Head Job-K8-Needs A Polish & O/S Valves - GRUNTMAX - 21-10-2009
El Cheapo Supercheap Port CCing Burret
[attachment=7779]
Will have to have The Thai Head Polisher trim up 2 ports, to 4 @ 152cc.
Head Dome CC is approx 16.5cc with o/size valves on K8, APE never told me that, The Thai Head Polisher did though