+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: '02-up ECU swap to '99-'00 BUSA one ??? (/showthread.php?tid=11628)
'02-up ECU swap to '99-'00 BUSA one ??? - lensflare - 16-02-2009
Hi fellows,
i have the idea to install on my '00 BUSA a '02-up ECU (32bit version), for the capability of the 32bit one to be flashed and to have two maps available on run.
has anyone done this?
what do i need other than the ECU?
thank you very much!!!
Lens
RE: '02-up ECU swap to '99-'00 BUSA one ??? - Greeny_SA - 16-02-2009
You need the ecu and an 02 to 07 stator rotor (in magneto). I managed to
get one last wk in aust wrecker's.new suzuki price about $850.00.2nd hand
are rare as hen's teeth. not too many motor's get binned but i got one for
270buck's.look on ebay USA i saw 2 there last week but freight is approx $50
from the u s Happy hunting,i'm doing the same thing.
RE: '02-up ECU swap to '99-'00 BUSA one ??? - lensflare - 17-02-2009
thank you!!!!
no differences in injector harness or other harnesses???
RE: '02-up ECU swap to '99-'00 BUSA one ??? - Maj - 17-02-2009
You need to repin a couple of wires at the ecu connector and reverse the polarity of the crank sensor (reverse the wires in the ecu plug)
Can't remember which wires, but there is a big discussion on SuzukiHayabusa.org
RE: '02-up ECU swap to '99-'00 BUSA one ??? - lensflare - 17-02-2009
thank you very much... i have to choose if swapping or buying a PCIII and its HUB....
RE: '02-up ECU swap to '99-'00 BUSA one ??? - Hutch99 - 08-04-2009
im new to the mods...
what does this improve???
RE: '02-up ECU swap to '99-'00 BUSA one ??? - BUSGO - 08-04-2009
Only what is asked in the first post by lensfare.
A lot of work for very little gain and no point on a road bike.
RE: '02-up ECU swap to '99-'00 BUSA one ??? - lee8sec - 08-04-2009
It gives you the ability to reflash the factory ecu. You can change basicly all the ecu settings. You need to know what your doing and a dyno or you could do some damage. GO to the other busa forums & http://www.boostbysmith.com/ecu.html for untold info. Leigh
http://www.activeboard.com/forum.spark?forumID=99460&subForumID=392256&p=2
RE: '02-up ECU swap to '99-'00 BUSA one ??? - lee8sec - 08-04-2009
The postman just delivered my ecu & rotor.
They are getting hard to get at the right price. Leigh
RE: '02-up ECU swap to '99-'00 BUSA one ??? - Hutch99 - 08-04-2009
hmmm... well any work i do on my bike, i ask Jamie at S&R Pro first.
he usually has an idea if im wasting my time.
one thing. running four short stacks, better than running two short, two long??????????
RE: '02-up ECU swap to '99-'00 BUSA one ??? - lee8sec - 19-04-2009
Just fitted my ecu & rotor, repinned harness. Started staight up. Leigh
RE: '02-up ECU swap to '99-'00 BUSA one ??? - lee8sec - 20-04-2009
Reflashed it today, still runs. Now of to the dyno to check. Leigh