Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED
Sump Plug - oil drip - Printable Version

+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Sump Plug - oil drip (/showthread.php?tid=11857)

Pages: 1 2


Sump Plug - oil drip - Louwai - 18-03-2009

Had mine serviced recently. A few days after getting it back I noticed some drops of oil on the garage floor. (It has NEVER leaked oil before)
It's dropping 1 drop per day after I get home. When it's hot. I assume it's also dropping one in the morning when I get to work, but can't really check the crappy ground.

Rang the guy & he said 'wash it, could be some left over in the headers". Not sure how, but anyway.
Washed it well.
Next day, drip.
Had a good look. Seems to be coming from the sump plug area. I put a spanner on it just to check. (no major force) It's tight.
I didn't want to undo it just incase it's crossed.

Any other suggestions before I call this guy again?????


RE: Sump Plug - oil drip - BUSGO - 18-03-2009

There should be a copper crush washer between the sump plug and the sump.
If it is not there, you are in danger of getting a stripped plug hole.
Make sure the service department replaced the washer with a new one every time they change the oil.
It is only about 40cents.


RE: Sump Plug - oil drip - Volvi - 18-03-2009

if not as Busgo says then they might have stripped the thread.


RE: Sump Plug - oil drip - Madmax - 18-03-2009

Volvi Wrote:if not as Busgo says then they might have stripped the thread.

+1 Volvi. Take it back to the bloke who serviced the bike. Don't touch it with your own spanners. I suggest a little standing over the bloke while he checks it to ensure he hasn't stripped the thread off the sump. Fixing a stripped sump is costly. if he bruk it - he fixes it!



MaxAustralia2HayabusaAustralia2


RE: Sump Plug - oil drip - Gassick - 19-03-2009

+1 Volvi. Take it back to the bloke who serviced the bike. Don't touch it with your own spanners. I suggest a little standing over the bloke while he checks it to ensure he hasn't stripped the thread off the sump. Fixing a stripped sump is costly. if he bruk it - he fixes it!

That should be easy for you Bryan! Considering you're 6'13" Knuppel2


RE: Sump Plug - oil drip - Louwai - 19-03-2009

Gassick Wrote:That should be easy for you Bryan! Considering you're 6'13" Knuppel2


We'll see Mark. The mech is the same guy who serviced it before I came to Melb. He also serviced all my bikes prior to the Busa.
Know him pretty well. If he's broken anything he'll fix it.

Just can't go back to him until next week. He's on hols in WA.


RE: Sump Plug - oil drip - BUSGO - 19-03-2009

You should be able to see if the washer is there if you get down with a torch Bryan.


RE: Sump Plug - oil drip - Louwai - 20-03-2009

BUSGO Wrote:You should be able to see if the washer is there if you get down with a torch Bryan.

Haven't had a look with a torch yet. Will get down there on the weekend. I'd be surprised if it's not there re: last post. But he possibly may have someone else in the shop now, or an apprentice.

I haven't been to his workshop for yrs.
His workshop is at Browns Plains (southside) & I live in Herston (northside). The Mech lives at Ashgrove, very close to my place. So I just drop the bike at his place & he takes it to work with him. Or he'll come to my place & pick it up.


RE: Sump Plug - oil drip - Nitehawk - 20-03-2009

Had the same problem with mine after I got it back from a certain "performance" shop in Knox. I dont think they replaced the sump plug washer and as a consequence, when I did the service next I found the sump plug leaked like a siev after I put the sump plug back in. Took it down to a mechanic friend of mine who put a heli coil in for me. Bit of a messy exercise but all good now. Now I change the washer every time I do a service.


RE: Sump Plug - oil drip - Volvi - 20-03-2009

when I changed my pan and plug couple of years ago if i recall correctly the new plug had a built in crushable washer. So on first tightening it was till crushed. Are you saying at every oil change one needs to "add" a new washer?


RE: Sump Plug - oil drip - BUSGO - 20-03-2009

The washer is not fitted to the plug Volvi it is a separate piece.


RE: Sump Plug - oil drip - busababe - 21-03-2009

Nitehawk Wrote:Had the same problem with mine after I got it back from a certain "performance" shop in Knox. I dont think they replaced the sump plug washer and as a consequence, when I did the service next I found the sump plug leaked like a siev after I put the sump plug back in. Took it down to a mechanic friend of mine who put a heli coil in for me. Bit of a messy exercise but all good now. Now I change the washer every time I do a service.

Mine was stripped, had a heli coil put in by the local Suzuki dealer. Now I do most things myself. Don't trust anyone else to work on the bike


RE: Sump Plug - oil drip - 2 DOGS - 21-03-2009

busababe Wrote:
Nitehawk Wrote:Had the same problem with mine after I got it back from a certain "performance" shop in Knox. I dont think they replaced the sump plug washer and as a consequence, when I did the service next I found the sump plug leaked like a siev after I put the sump plug back in. Took it down to a mechanic friend of mine who put a heli coil in for me. Bit of a messy exercise but all good now. Now I change the washer every time I do a service.

Mine was stripped, had a heli coil put in by the local Suzuki dealer. Now I do most things myself. Don't trust anyone else to work on the bike



RE: Sump Plug - oil drip - 2 DOGS - 21-03-2009

Dont trust the stealers, do it all yourself if you are able.Much safer.


RE: Sump Plug - oil drip - Nitehawk - 23-03-2009

Always do my services myself now...After the trouble that was caused last time...stripped sump plug and over tightening brake calipers bolts with rattle gun which resulted in rounded bolts when changing pads...I was not a happy camper. But learnt my lesson now...DO IT YOURSELF!!