+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: General Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=1)
+--- Thread: is this the norm (/showthread.php?tid=12142)
is this the norm - king 62 - 23-04-2009
hi everyone, i just wondering if this is the norm ,when the bike is idleing if i turn full lock on the bars [without moving]to the left its fine but when i turn full lock to the right the revs increase i bit, anyone have this problem or am i just being fussy
RE: is this the norm - BUSGO - 23-04-2009
It means that your accelerator cable is binding somewhere or is not adjusted for the correct slackness.
I suggest that you just lift the tank and track the cables. Pretty easy adjustment if they are too tight.
RE: is this the norm - king 62 - 23-04-2009
thanks busgo now i know its not the norn i will check it out when i do my service very soon' cant ride 4 while anyway due to a bit of a leg injury, so its a good time to do a bit of exploring on the beast
RE: is this the norm - Greeny_SA - 23-04-2009
king 62 Wrote:thanks busgo now i know its not the norn i will check it out when i do my service very soon' cant ride 4 while anyway due to a bit of a leg injury, so its a good time to do a bit of exploring on the beast
Hey,King. MY 2000 has done that since the day i got it.Never really bothered me enough to do anything about it. Never caused a problem,
but I must look at it one day. I recon Busco's on the money.
RE: is this the norm - king 62 - 23-04-2009
THANKS GREENY. its not a problem here as well, but will get to it 4 sure
RE: is this the norm - Bon - 23-04-2009
Check the choke cable while your there, that was the problem on mine.
RE: is this the norm - king 62 - 23-04-2009
Bon Wrote:Check the choke cable while your there, that was the problem on mine.
will do that bon the choke has the cruse control mod done to it so might be worth cheaking out
RE: is this the norm - andcad - 23-04-2009
Bon Wrote:Check the choke cable while your there, that was the problem on mine.
+1, same with mine
RE: is this the norm - black13 - 23-04-2009
both my busas have done that, but only when the fast idle/choke is applied, i dont think its a problem
cheers