+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: Motorcycle Lift (/showthread.php?tid=12194)
Motorcycle Lift - FastPhil - 30-04-2009
Does anyone know of a good cheapish motorcycle lift or a DIY solution to lifting the bike for easier access. It's a bit harder these days for me to bend in the middle.
RE: Motorcycle Lift - bigfoot - 30-04-2009
my pop made his out of an old table and uses a ramp; to roll his bikes up and down it. he uses ratchet straps to hold the bikes up.. thats the cheapest way i think, or you can buy a new one.
RE: Motorcycle Lift - Dan85 - 30-04-2009
Phil radum sells some good hydraulic lift tables i have one and its very good. holds plenty of weight and is wide enough to put the bike up on the paddock stand at the back and has a front wheel chock aswell. they come on wheels so easy to move the stand around your garage looking about $550 for the big one and 450 for the smaller one
RE: Motorcycle Lift - FastPhil - 30-04-2009
Dan85 Wrote:Phil radum sells some good hydraulic lift tables i have one and its very good. holds plenty of weight and is wide enough to put the bike up on the paddock stand at the back and has a front wheel chock aswell. they come on wheels so easy to move the stand around your garage looking about $550 for the big one and 450 for the smaller one
Thanks Dan
RE: Motorcycle Lift - FastPhil - 30-04-2009
Does any one have an opinion on these
http://www.fabre.com.au/kendon/
RE: Motorcycle Lift - FastPhil - 30-04-2009
bigfoot Wrote:my pop made his out of an old table and uses a ramp; to roll his bikes up and down it. he uses ratchet straps to hold the bikes up.. thats the cheapest way i think, or you can buy a new one.
Yeah, good idea!
RE: Motorcycle Lift - Dan85 - 30-04-2009
those fabre ones looked a bit flimsy to me but never seen one in person.
RE: Motorcycle Lift - Maj - 30-04-2009
Does look light, but if space is an issue its better than the usual bulky ones
Brought mine from Spanner in the motorcycle trader mag