01 busa with tune - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: General Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=1) +--- Thread: 01 busa with tune (/showthread.php?tid=20693)

01 busa with tune - mewho - 30-06-2013 Hey guys what sort of HP should i expect out of an 01 with a dyno tune with stock everything just yoshi bolt ons ???? RE: 01 busa with tune - Tony Nitrous - 30-06-2013 Mine was on a couple of dyno's. I think the average was about 159hp, Stock motor, Yoshi cans, baffles out. Doesn't sound a lot but it pulled real well at top end and ran regular 10.3's with an average (at best) rider. RE: 01 busa with tune - CeeJay07 - 30-06-2013 You may notice a difference with a flash-tune....my '07 got 177 hp with flash, small airbox mod, K&N filter and Yoshi bolt ons (at Pete's Pitstop) RE: 01 busa with tune - BUSABAZZ - 02-07-2013 Mine's an '01, only had the air box flapper removed and has bolt on Yoshi's, I gained 9hp from yoshi box dyno tune... First run reading.... Max Power = 152.80RWHP and Max Torque = 94.04 8 runs later.... Max Power = 161.68RWHP and Max Torque = 98.35 RE: 01 busa with tune - stunva - 04-07-2013 K1, K&N Filter, full Muzzy 4>1, PC111, Airbox mod pairs to crankcase, 60,000ks RE: 01 busa with tune - Xhiler8r - 05-07-2013 anywhere from 155hp to 165hp different dynos read different figures do a run on the dyno before you do any mods and then after to get the best result