![]() |
Sydney Chrome Group. Pan, Simmo, Graham - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: General Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=1) +--- Thread: Sydney Chrome Group. Pan, Simmo, Graham (/showthread.php?tid=6633) |
Sydney Chrome Group. Pan, Simmo, Graham - BLACKZOOK - 25-03-2007 Simmo, Pan and Graham. Mark is in the process of polishing the parts for chroming, whilst there I noticed that the following parts are missing. Rear grabrail Rear footpegs and hangers front footpegs and springs Bar ends Front wire cable clip Rear master cylinder bracket (the one that pivots on pedal shaft) These parts were amongst the bits handed down to each of you so would you please check your sheds and let me know if you have all or some of these bits. RE: Sydney Chrome Group. Pan, Simmo, Graham - loverustler - 25-03-2007 BangBus Racing Thats in very porn taste:ghastly: RE: Sydney Chrome Group. Pan, Simmo, Graham - BLACKZOOK - 25-03-2007 loverustler Wrote:BangBus Racing        Thats in very porn taste:ghastly: Are you dissen my racing team:rock: RE: Sydney Chrome Group. Pan, Simmo, Graham - pan - 25-03-2007 Hi. Rear grabrail - I had already done mine before I got the stuff, so I didn't ever get one with THE KIT. Rear footpegs and hangers. THAT WAS ME! ![]() Front footpegs and springs. I don't have THE SET, but I have a spare set (not chromed) I don't need because I bought the Gixxer pegs. Yours if you want them Mark. Bar ends. Mine were chromed when I first bought the bike, so I didn't receive any with THE KIT. I do have a pack of new chromed bar ends, still in the "Bling Parts Australia" packet. If the others don't show, Mark can have them too (poor bloke's been waiting for us a loooooong time!). Front wire cable clip. Never seen it. Mine is still stock. Rear master cylinder bracket (the one that pivots on pedal shaft). Not sure what this one is. I thought it was a black plastic bit. Either way, mine isn;t chromed. Just let me know when/where you want them... ![]() RE: Sydney Chrome Group. Pan, Simmo, Graham - BLACKZOOK - 25-03-2007 Just read my post again and noticed it seems abrupt ![]() Great offer Pan thanks mate ![]() ![]() RE: Sydney Chrome Group. Pan, Simmo, Graham - loverustler - 26-03-2007 Hey thanks Pan, that would be great ![]() anything i can do for you in return, let me know RE: Sydney Chrome Group. Pan, Simmo, Graham - 1hotbusa - 02-04-2007 Hi there, I will have a look around. I did not take anything out of the box just stored it when I got it. I also did not see anything like rear cush drive hub or rear brake support hanger when I had the parts but I had already chromed these previously. Now Kathy has her bike I am thinking of doing the parts I have already polished for now and then waiting for the rest to come back. Hope it comes up good Mark. RE: Sydney Chrome Group. Pan, Simmo, Graham - simmo - 02-04-2007 There was no rear cush drive hub Graham, but the grab rail has gone missing RE: Sydney Chrome Group. Pan, Simmo, Graham - 1hotbusa - 03-04-2007 simmo Wrote:There was no rear cush drive hub Graham, but the grab rail has gone missing Never got the rear grab rail, even checked with Kathy and she never saw it. Will check garage when I can. RE: Sydney Chrome Group. Pan, Simmo, Graham - simmo - 03-04-2007 Front wire cable clip checked mine its has not been coppered, so its been lost at Astra or I have lost it some where coppered or not? :rolleyes: |