Top Engine Specialist in Brisbane or East Coast?

[BioBa]

Hello guys - I'm new to this forum and hope you can help me.
I'm using a Hyabusa engine in my Radical SR3 and I'm looking for a top grade Hyabusa engine expert in Brisbane or maybe somewhere else on the east coast. When fitting the engine in a 500kg car the average life span is 50-60 hours after which the engine needs to be rebuild. Any help would be apreciated to find some who knows what he is doing.
While I'm at it any Hayabusa NOS experts out there as well?

[CeeJay07]

Contact Pete (fasterfaster on the forum)....he's up the north side of Gympie (Glenwood I think)....he's the man to talk to about the Busa engine.

[BioBa]

Thanks! I had heard about that guy but was really hoping to find someone closer to home (Brisbane).

[GRUNTMAX]

....or contact Leonard (Legend).
Maybe you'll get more than 50 -60 hrs with one of these;
http://www.jegs.com/i/Moroso/710/23930/1...Id=1330600
....& use Gen2 bearings.

---

....or contact Leonard (Legend).
Maybe you'll get more than 50 -60 hrs with one of these;
http://www.jegs.com/i/Moroso/710/23930/1...Id=1330600
....& use Gen2 bearings.
http://www.bikebandit.com
http://www.schnitzracing.com
http://www.sbdev.co.uk/

[BioBa]

....or contact Leonard (Legend).
Maybe you'll get more than 50 -60 hrs with one of these;
http://www.jegs.com/i/Moroso/710/23930/1...Id=1330600

I'm already on a dry sump oil system.
Who is Leonard? Any contact details?

[Pa King]

Pete is your man as already mentioned. If your in Brisbane you will be there in about 2 hours. People have travelled much further then Brisbane to have him do work or dyno tune .

[GRUNTMAX]

While I'm at it any Hayabusa NOS experts out there as well?

http://www.sandrpro.com/:Bump:

---

....or contact Leonard (Legend).
Maybe you'll get more than 50 -60 hrs with one of these;
http://www.jegs.com/i/Moroso/710/23930/1...Id=1330600

I'm already on a dry sump oil system.
Who is Leonard? Any contact details?

Also on this forum

[CeeJay07]

Pete is your man as already mentioned. If your in Brisbane you will be there in about 2 hours. People have travelled much further then Brisbane to have him do work or dyno tune .

Spot on there Pa King....I'm riding up to see him from Newcastle in a couple of weeks.

[mark]

Good luck

[jason]

You could also try procycle dyno andrew is in slacks creek close to u and should be able to sort any problems you have his a drag racer and nows about performance engines.

[BioBa]

Thanks for all your help!