Contact Us
01-11-2008, 01:16pm
The model shown is the Linear Sensor which is the Part suggested for the Hayabusa and is superceded by a model that looks similar to the Pressure/Tension Sensor.
If you want to replace the Shift Rod you require either the Shift Rod Tension Sensor (Pull Type) m6/m6 threads 4-101 or the Shift Rod Pressure Sensor (Push Type) m6/m6 threads 4-102 depending on Shift patten both requiring Male/Male Shift Rod B (Black Anodized Aluminum) 32104050.
Not sure why they use the Linear Sensor as the Pressure/Tension Sensor works quite alright.
http://www.powercommander.com/powercomma...ifter.aspx
If you want to replace the Shift Rod you require either the Shift Rod Tension Sensor (Pull Type) m6/m6 threads 4-101 or the Shift Rod Pressure Sensor (Push Type) m6/m6 threads 4-102 depending on Shift patten both requiring Male/Male Shift Rod B (Black Anodized Aluminum) 32104050.
Not sure why they use the Linear Sensor as the Pressure/Tension Sensor works quite alright.
http://www.powercommander.com/powercomma...ifter.aspx
Shayne