Contact Us
06-04-2011, 06:51pm
(This post was last modified: 06-04-2011, 07:04pm by fasterfaster.)
Near the Yosh Plug right hand side battery area you will find the "dealer Plug" It's a white six pin plug with a rubber cap over it. You will see it has a clip that locks it to its female part (if it was there) Looking into the plug end with the clip on the top side jump the two terminals on the right side of the plug and turn ignition on and a fault code number will come up on dash. Tell us the code number ?
If the code goes when you turn key off then you may have to do this once light is lit to get error code number. If this doesn't work you will need to connect to an SDS unit and it will be able to read the past and present codes stored in ECU
If the code goes when you turn key off then you may have to do this once light is lit to get error code number. If this doesn't work you will need to connect to an SDS unit and it will be able to read the past and present codes stored in ECU