Contact Us
20-05-2007, 07:34pm
Hey fellas. This is my first post on the new board on the old board I went by the name Geribusa. Some of the members know me from SH.ORG and 200mph.org
I've just fitted a MTC 2-stage lockup to my stock clutch setup. They aren't supposed to be fittable but I did some small mods to mine and it works just great. I used 6 stock 'busa small valve springs for base pressure and the lever action is very light. By increasing wieght on the lockup arms it now holds 400hp comfortably.
All I did to mod the clutch is drill the bolt-holes out 1mm each and machine the posts shorter, and it fits like a charm.
I've just fitted a MTC 2-stage lockup to my stock clutch setup. They aren't supposed to be fittable but I did some small mods to mine and it works just great. I used 6 stock 'busa small valve springs for base pressure and the lever action is very light. By increasing wieght on the lockup arms it now holds 400hp comfortably.
All I did to mod the clutch is drill the bolt-holes out 1mm each and machine the posts shorter, and it fits like a charm.