24-10-2011, 05:46pm
ECU REFLASH Locations
|
24-10-2011, 09:06pm
(This post was last modified: 24-10-2011, 09:08pm by fasterfaster.)
Camel by the term caravan are you refering to the Glenwood Hilton ?
![]() ![]() ![]() Maj they were not mature frogs the Camel was tossing about ..... they were still in the taddie stage I'll bet ![]() John no probs and a pleasure to catch up .................. anytime. By the way John I reckon you should change the name back to "BiG" John ![]() Cheers
26-10-2011, 09:40pm
Bloody green tree frogs belong in the dunny! Not in your bed!
Bloody hypo frogs ![]()
06-12-2011, 05:05pm
I'd reckon
![]() Advanced Settings>Inj Balance map,...and adjust all numbers on OEM map below 100 same pecentage as injector cc/min variation. Run big EV14s top rail at 43psi with Aeromotive in tank 340 l/min ..and would be a far more accurate way of adjusting. ....although, they are still working on the wide band auto tune ![]() (06-12-2011, 05:05pm)GRUNTMAX Wrote: I'd reckonyou could even tweek intank up to 55 n run external reg off your refrigerated boost intercooling ![]() ![]() 12mm cyl studs n 35 psi boost with 81mm bore. Should be good for the road ![]()
06-12-2011, 06:21pm
If you drag the bottom of the advanced box down you will find the secondarys size options .
06-12-2011, 09:19pm
(06-12-2011, 06:21pm)Maj Wrote: If you drag the bottom of the advanced box down you will find the secondarys size options .Thanks Maj. Explains a lot. However, which one to use, size options. or injector balance map settings with same size injectors for 270HP NA or 500 HP Supercharged big secondary size injectors ![]()
21-12-2012, 09:09pm
Is it worth flashing a stick new busa to iron out fuelling kinks? Or should I wait till get slip ons ? What's the costs involved and where can I get it done pls? Ta
Don't tempt fate,TAUNT IT!
Carl at Road & Circuit in Moorebank (formerly RC Motorcycle Tuning - 9602 9844) did mine and I couldn't be happier with the results and the customer service was fantastic. He turned an impressive bike into an awesome machine. Highly recommended.
Ahmed.
18-05-2013, 09:56am
Where did Pete (faster faster) go?
Can any one recommend any other good dyno places in SE Qld? ![]() Glen
26-05-2013, 11:58am
(This post was last modified: 26-05-2013, 12:05pm by fasterfaster.)
26-05-2013, 03:16pm
Pete! Did you set up shop in Thailand? Woo Hoo! I'll be on the next flight!
26-05-2013, 05:53pm
That's livin !!! good luck to ya n enjoy
![]()
26-05-2013, 06:16pm
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)