petes xe ,so far,lol
#1
i got mine out of a paddock about 18 months ago ,lets say it had seen better days, mines a late 1984 xe
[Image: 205881_4066362989606_935957495_n.jpg]
with the 20s,ive got for it
[Image: 544073_4528368419453_593955269_n.jpg]
mines getting a blown 302 windsor when complete ,671 oh yeah ,so it needs to be welded a little better
[Image: 62732_4425917658248_1745688538_n.jpg]
[Image: 547574_4534824940862_775305572_n.jpg]
mines copping an el dash and el xr interior
https://fbcdn-sphotos-h-a.akamaihd.net/h...2570_n.jpg
scored a 302 windsor last weekend
[Image: 247999_4647361874215_666183455_n.jpg]
i like welding
[Image: 537327_4040333458884_552709389_n.jpg]
Reply
#2
Share the build with us Pi_thumbsup
[Image: Resizeofbusa005.jpg] REGARDS ROD
MOBILE 0433 92 99 22
kangaroos1996@msn.com
Reply
#3
theres heaps more piccis ,

ok the plan is to build my own,from a base model,ive had hundreds of falcons but never really spent the time to do it from scratch ,this build is diff ,as im in no rush to get it built ,so i keep collecting parts and work on it when i feel like it

the day i bought it
[Image: 246461_3183012746402_288753184_n.jpg]
[Image: 282778_3217335324445_1848133984_n.jpg]

[Image: 396758_3303217751452_695234169_n.jpg]
i bought a 460 bb for it but changed my mind as the weight factor ,and you need to spend a bucket load to get them to rev n go ,so i sold it
[Image: 528889_3302454292366_42619187_n.jpg]
last week i had ome time and wanted to make the el seat mounts ,so i removed this floor brace and welded in and ef/el floor hump unit
[Image: 375106_4628441801225_577425764_n.jpg]
also to fit a centre pull handbrake
[Image: 525309_4628417320613_1376563823_n.jpg]
mock up fit
[Image: 181416_4628488082382_1132757710_n.jpg]
then plug welded in
https://fbcdn-sphotos-b-a.akamaihd.net/h...2273_n.jpg
so i can use the el xr intherior
[Image: 923195_4629291422465_589302425_n.jpg]
[Image: 946782_4628758249136_485892273_n.jpg]
[Image: 21218_4629361504217_1196152570_n.jpg]
el dash steering coloum and padel box, bolt straight into the XE
[Image: 184533_4075839266507_1847585493_n.jpg]
Reply
#4
had a play again completely welded el seat mounts into XE then trial fitted seats n console ,also plated a little bit of rust ,and did some seem welding ,
[Image: 1069390_4919319312981_2025340692_n.jpg]
[Image: 1016683_4919324633114_2006587750_n.jpg]
[Image: 1013460_4919336873420_1870938844_n.jpg]
[Image: 47983_4919404395108_1525947955_n.jpg]
[Image: 999343_4919564839119_2009480640_n.jpg]
[Image: 150946_4919596479910_513298087_n.jpg]
[Image: 1006152_4919599679990_2136590650_n.jpg]
[Image: 11870925_10204352750091032_3366674167629...8f99a0b2f1]
Reply
#5
ok ive had some time snce i left my with and moved out ,i got the exhaust mocked up

[Image: 1622772_10201063776348744_1829899441_n.jpg]
[Image: 1551620_10201063928112538_413172551_n.jpg]
[Image: 935540_10201064125117463_1485383659_n.jpg]

mock up
[Image: 923047_10201064131917633_831046995_n.jpg]
[Image: 1620831_10201064138837806_2117138969_n.jpg]
made the mounts ,all rubber mounted ,just need to pull apart and paint
[Image: 15665_10201065834720202_1440448354_n.jpg]

[Image: 1654156_10201065935242715_1102898183_n.jpg]
[Image: 1560378_10201065935482721_1713051986_n.jpg]
[Image: 1620746_10201065936122737_2055227438_n.jpg]
[Image: 11870925_10204352750091032_3366674167629...8f99a0b2f1]
Reply
#6
Hi mate, you may want to come up to Armidale for a look one day. I have about 15 falcons in various states. Some very clean xe stuff that I would part with for bugger all. Had a lot to do with clevelands in competition use and still have heaps of clevo stuff stockpiled. For rego purposes you will find that fitting a late clevo block will make life much easier. Not trying to tell you how to suck eggs but when you see what we got up to with clevelands you will understand the point of the post. All the best, Paul.

(01-02-2014, 08:10pm)cyndemgum Wrote: Hi mate, you may want to come up to Armidale for a look one day. I have about 15 falcons in various states. Some very clean xe stuff that I would part with for bugger all. Had a lot to do with clevelands in competition use and still have heaps of clevo stuff stockpiled. For rego purposes you will find that fitting a late clevo block will make life much easier. Not trying to tell you how to suck eggs but when you see what we got up to with clevelands you will understand the point of the post. All the best, Paul.
I forgot that I have a good Cleveland block in a Zk fairlane that matches your car year wise for rego purposes. Anyway this is not intended as a sales pitch, just willing to help out with the project if interested.
Reply
#7
Doing a white fairmont atm 6 cylinder manual picked up a cammy 351 for it just confused with what diff maybe au xr8 series 1 or 2
Reply
#8
au diff wont fit an x series as there independant rear end an xe is watts link,
[Image: 11870925_10204352750091032_3366674167629...8f99a0b2f1]
Reply
#9
Good to see ta back here Pete... Best wished for you new future
BATFINK (aka Tony)

Nutkickyt1

GOD gave us a mind to use.........

Suzuki gives us a reason to loose it!!!!
Reply
#10
The AU utes were still live rear axle weren't they?
Reply
#11
ute diff will
[Image: 11870925_10204352750091032_3366674167629...8f99a0b2f1]
Reply




Users browsing this thread: 1 Guest(s)