Chrome Button Caps
#1
Hi All
I am trying to fit bar risers, because the body is getting older. I am having problems in removing the chrome caps on top of the bolts. Can anyone explain to me how to remove them.
Thanks Glen
Reply
#2
If you are talking the 4 bolts that hold the handle bar bracket on top of triple then there are no caps.

Its a fluted bolt whcih means a nut and thread one side and pin head with fluted grooves down the side on the other (top side). I found then a real bitch to try to undo on my 99. In the end I wedged in a small screwdriver between bracket and bolt head and used the drive on impact mode to loosen nut.
BATFINK (aka Tony)

Nutkickyt1

GOD gave us a mind to use.........

Suzuki gives us a reason to loose it!!!!
Reply
#3
Thanks Batfink That worked well
Reply
#4
The 4 bolts do have chrome caps just stick a knife blade or small flat blade screw driver under the edge of it to lever them up & out
Then use the correct allen key to hold the head while you undo the nut below this helps to do them up again
[Image: 20161213_085044-1_zpsi13nu5bx.jpeg]
[Image: b76e01eb-552d-45d5-97df-028004b674c3_zps59f1c171.jpg]

Busa's yeah i guess i like them I've owned a few Pi_tongue
Reply
#5
[Image: dbusasml.jpg]
I don't want a pickle . . .
Reply
#6
Thanks I did have a closer look after removing one. A fine blade worked for me.
Cheers Glen
Reply




Users browsing this thread: 1 Guest(s)