Pan's new gauges

[pan]

I was going to print them, but wasn't sure about paper quality and thickness. I think mine are laminated too...

If you still have the website, could you post it for others that may be interested in a DIY project? <i></i>

[hayabusa]

I saved them to my HD. I can email them but they about 3Mb They are blue and in MPH. It didn't bother me about the MPH bit though, I actually prefer it.

I printed them on Photo Paper and haven't had a problem in three years. <i></i>

[hayabusa]

Ahhh Ha.....Google is your friend.

home.cfl.rr.com/redbusa/TheGauges/index.html <i></i>

[pan]

Thanks Hayabusa...

Check them out...
"sometimes, crime does pay"

Employee of the Year
Easyrider Imports
www.easyriderimports.com.au

<i></i>

[Blackzook]

Pan,
Great write up mate. I used your install to guide me on fitting my Illumiglo's (thanks FF1) they went in with no hassles I even cleaned up the wiring for the heated grips and shift light at the same time.

You can fit Illumiglo's without taking off the needles just bend them slightly and put matches under them to stop them sticking.

Hardest part of the job was finding the right type of matches - the guy at the shop looked at me for a minute and said these would suit me perfectly.

I've been out to the garage twice already tonight just to turn on the ignition and watch them GLOW.


Bruce

See here, young man, from Walgett to the sea,
From Conroy’s Gap to Castlereagh, there’s none can ride like me.

<i></i>

[pan]

Hey, next time you run out to have another look, take a picture without the flash and post it if it turns out okay... <i></i>

[Blackzook]

Off

On

Bruce

See here, young man, from Walgett to the sea,
From Conroy’s Gap to Castlereagh, there’s none can ride like me.

<i></i>

[pan]

Look better in real life too...
Thanks for posting the pics Bruce . <i>Edited by: pan at: 3/12/05 12:50 am
</i>

[chunkylover]

Hey bruce where you get them from? Looks hot!
Anggita<i></i>

[pan]

Just found out from another thread with Andy Blue that he got them from FF1 (Pete's Pitstop in VIC). Just send a PM to FF1 for prices... We bought the shift lights off him. Good bloke. Good prices...

Not sure, but I'm guessing Bruce also got his from there.
"sometimes, crime does pay"

Employee of the Year
Easyrider Imports
www.easyriderimports.com.au

<i></i>

[Blackzook]

Correct.
1 phone call delivered next day. FF1 is the man. Bruce

See here, young man, from Walgett to the sea,
From Conroy’s Gap to Castlereagh, there’s none can ride like me.

<i></i>

[chunkylover]

cheers fellas...
Anggita<i></i>