26-11-2008, 10:05pm
BUILD PATIO FURNITURE
To start, you'll need:
About 65 assorted beer caps
1-foot square piece of 1/4-inch plywood
Four, 1-to1 1/2-inch-square, 18-inch posts
Four 12x2-inch strips of lattice
Four, 3-inch dry-wall screws
Some tacking nails
A tube of tub-and-tile adhesive
Simply screw the plywood to the posts, brace them with lattice as shown, and glue the caps to the top in whatever creative arrangement you like. Warning: Don't leave the finished table out in the rain, because the caps will rust.
To start, you'll need:
About 65 assorted beer caps
1-foot square piece of 1/4-inch plywood
Four, 1-to1 1/2-inch-square, 18-inch posts
Four 12x2-inch strips of lattice
Four, 3-inch dry-wall screws
Some tacking nails
A tube of tub-and-tile adhesive
Simply screw the plywood to the posts, brace them with lattice as shown, and glue the caps to the top in whatever creative arrangement you like. Warning: Don't leave the finished table out in the rain, because the caps will rust.