+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: General Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=1)
+--- Thread: 2001busa ,info (/showthread.php?tid=19829)
Pages:
1
2
2001busa ,info - revhead - 29-12-2012
sorry if this has been asked before.
ive fitted dj petes motor and wiring to my busa,now his busa was marked as a late 2001 bike, is it a k1 ,or is it a 2002 k2 ,as i need to buy a power commander
thank you in advance
RE: 2001busa ,info - ballsybusa - 29-12-2012
Hey going off the color it's a 02, but the 01 and 02 are the same bike so shouldn't matter:)
RE: 2001busa ,info - yella - 29-12-2012
YEARS - HAYABUSA PART
1999-2000 304-411
2001 320-411
2002-2006 312-411
2008 339-411
Different part numbers for 1999-2000, 2001 and 2002-2006.
99-2000 has the same harness as well as ecu. if you wanted to upgrade the ecu to a 32bit 02-07 you can do that with factory 99/2000 harness by changing the rotor and ecu. the harness can be re-pinned and a sensor rewired.
2001-07 is the same harness but 01 has a different ecu.
Random info for ya Pete
RE: 2001busa ,info - Maj - 29-12-2012
whats the ecu number off Petes bike
yr models and actuall yr of build overlap some
a late 01 could be 02 model with the later ecu
RE: 2001busa ,info - -M- - 30-12-2012
(29-12-2012, 12:32pm)yella Wrote: YEARS - HAYABUSA PART
1999-2000 304-411
2001 320-411
2002-2006 312-411
2008 339-411
Different part numbers for 1999-2000, 2001 and 2002-2006.
99-2000 has the same harness as well as ecu. if you wanted to upgrade the ecu to a 32bit 02-07 you can do that with factory 99/2000 harness by changing the rotor and ecu. the harness can be re-pinned and a sensor rewired.
2001-07 is the same harness but 01 has a different ecu.
Random info for ya Pete
Do you know which sensor needs to be rewired?
RE: 2001busa ,info - Maj - 30-12-2012
some talk about reversing the crank sender polarity
i have not changed a 99-00 , and not had the need, the 01 does not need changing and i am not sure the 99 does either
black sender wire is positive and i think its the green and white on the harness side is also positive
RE: 2001busa ,info - yella - 30-12-2012
I had read the same with the crank sender it was factory swapped on the 01 . I have not done this conversion yet but getting info together as Im sure it will happen at some stage.
99-00 models - swap ECU pins 36 & 43, 56 & 33, and 60 & 53
Install 02-07 rotor
Install 02-07 ECU
'01 model
Install 02-07 rotor
Install 02-07 ECU
(no pin swapping necessary)
http://www.psychobike.com/forums/suzuki-hayabusa/12058-ecu-editor-4.html
http://1320bikes.com/showthread.php?1059-How-to-convert-Hayabusa-16-bit-ECU-to-32-bit
RE: 2001busa ,info - revhead - 30-12-2012
the numbers are , 32920-24FLO,
112100-1110
NEP075
HEY IAN what year and month is the old blue busa and the frame number cheers
RE: 2001busa ,info - yella - 30-12-2012
8/01 Pete
I have looked for a complete ECU listing for the Busa but can not find a detailed list and the Australian, US and EU ECU's all have slitghly different numbers........................................ Hang on I may be able to find something
RE: 2001busa ,info - yella - 30-12-2012
Found this on the interweb but Numbers a the bottom are close but not Aussie
RE: 2001busa ,info - revhead - 30-12-2012
(30-12-2012, 01:21pm)yella Wrote: Found this on the interweb but Numbers a the bottom are close but not Aussiebump
RE: 2001busa ,info - yella - 30-12-2012
Need people with 01-02 busa's to have a quick look at numbers but I think you have the stand alone 16bit Pete
RE: 2001busa ,info - revhead - 30-12-2012
(30-12-2012, 10:07pm)yella Wrote: Need people with 01-02 busa's to have a quick look at numbers but I think you have the stand alone 16bit Peteno being a late 01 model im guessing its an o2 this is the colour of the bike 01 completely diff
(30-12-2012, 10:43pm)revhead Wrote:http://www.dixonarchive.com/hayabusa/modelhistory1.htm(30-12-2012, 10:07pm)yella Wrote: Need people with 01-02 busa's to have a quick look at numbers but I think you have the stand alone 16bit Peteno being a late 01 model im guessing its an o2 ,t the colour of the 01 bike completely diff
(30-12-2012, 10:43pm)revhead Wrote:(30-12-2012, 10:07pm)yella Wrote: Need people with 01-02 busa's to have a quick look at numbers but I think you have the stand alone 16bit Peteno being a late 01 model im guessing its an o2 this is the colour of the bike 01 completely diff
(30-12-2012, 10:43pm)revhead Wrote:http://www.dixonarchive.com/hayabusa/modelhistory1.htm(30-12-2012, 10:07pm)yella Wrote: Need people with 01-02 busa's to have a quick look at numbers but I think you have the stand alone 16bit Peteno being a late 01 model im guessing its an o2 ,t the colour of the 01 bike completely diff
![[Image: 2002_blueblack.jpg]](http://www.dixonarchive.com/hayabusa/images/modelhistory/2002_blueblack.jpg)
RE: 2001busa ,info - -M- - 31-12-2012
You could remove the stator cover and check the flywheel rotor.
16bit resembles this.
32bit resembles this.
RE: 2001busa ,info - Maj - 31-12-2012
24-FLO is 32 bit
Its an 02 model ecu and bike too i suppose ;)