sorry if this has been asked before.
ive fitted dj petes motor and wiring to my busa,now his busa was marked as a late 2001 bike, is it a k1 ,or is it a 2002 k2 ,as i need to buy a power commander
thank you in advance
29-12-2012, 12:32pm (This post was last modified: 29-12-2012, 12:43pm by yella.)
YEARS - HAYABUSA PART
1999-2000 304-411
2001 320-411
2002-2006 312-411
2008 339-411
Different part numbers for 1999-2000, 2001 and 2002-2006.
99-2000 has the same harness as well as ecu. if you wanted to upgrade the ecu to a 32bit 02-07 you can do that with factory 99/2000 harness by changing the rotor and ecu. the harness can be re-pinned and a sensor rewired.
2001-07 is the same harness but 01 has a different ecu.
(29-12-2012, 12:32pm)yella Wrote: YEARS - HAYABUSA PART
1999-2000 304-411
2001 320-411
2002-2006 312-411
2008 339-411
Different part numbers for 1999-2000, 2001 and 2002-2006.
99-2000 has the same harness as well as ecu. if you wanted to upgrade the ecu to a 32bit 02-07 you can do that with factory 99/2000 harness by changing the rotor and ecu. the harness can be re-pinned and a sensor rewired.
2001-07 is the same harness but 01 has a different ecu.
some talk about reversing the crank sender polarity
i have not changed a 99-00 , and not had the need, the 01 does not need changing and i am not sure the 99 does either
black sender wire is positive and i think its the green and white on the harness side is also positive
I had read the same with the crank sender it was factory swapped on the 01 . I have not done this conversion yet but getting info together as Im sure it will happen at some stage.
30-12-2012, 12:16pm (This post was last modified: 30-12-2012, 12:57pm by yella.)
8/01 Pete
I have looked for a complete ECU listing for the Busa but can not find a detailed list and the Australian, US and EU ECU's all have slitghly different numbers........................................ Hang on I may be able to find something