+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: General Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=1)
+--- Thread: Helibars (/showthread.php?tid=21122)
Pages:
1
2
RE: Helibars - Kendo - 13-11-2013
(13-11-2013, 07:32am)gcbusa Wrote: No I havnt bought bike with them on, will look into it, any ideas would help. Cheers
Here is the relevant part from HeliBars installation instructions for you.
By choke cable they are referring to the fast idle cable.
* NOTE * The choke cable must be relocated from the stock position. Remove the choke cable from the control housing and pull it back around the steering head. With the fuel tank hinged up, place the choke cable on top of the frame and between the two screws anchoring the fuel tank to the frame. This will reposition the cable to the left of the steering head.
Or the full instructions on a pdf here:
https://www.helibars.com/product/suzuki-hayabusa-replacement-handlebars-0
RE: Helibars - captainrob - 13-11-2013
this is how mine ended up?
![[Image: IMG_0686.jpg]](http://s920.photobucket.com/user/captainrob_bucket/media/IMG_0686.jpg.html)
RE: Helibars - dalmazzo - 22-03-2018
I fitted HeliBars to my 2018 and now when I full lock left pulling out of car parks, the Kill Switch hits the fairing and kills the bike.
Has anybody else had this issue?
I'm thinking of shorting the switch out... or melting the fairing! :-D hahaha.
RE: Helibars - Shordy - 26-03-2018
RE: Helibars - dalmazzo - 26-03-2018