8sec on motor?

[Maj]

Antz is already long and low , and good 60's , picking up a bit more in the 60 and 330 will see him pretty close but maybe need a little more power to get an 8.99

[AntsBuza]

Yep I saw the article from super street bike.
Bike had 6" stretch,lowered,full exhaust,air shifter,pc3,race fuel,light wheels and a pro rider.

My 60' are ok maybe need to loose some weight of the bike.
Or rider.
What do fly weight jockey's weigh ?
100kg I hope lol

[spamanglenn]

did a 9.855 with 1.70 60ft.I can,t see anyone going sub 1.5 60ft stock length.Without delving into the motor for compression,cams,head etc,let alone air shifter or lockup clutch.With a full weight 80+kg suited rider i can,t see anyone doing better than 9.5.In america stock, means stock bore only.Who cares, their are 4 of us in nsw in the 9,s now.2 in the 9.7,s and 2 in the 9.8,s.If it can be done you,re gonna see if i was right.My guess is the engine seals will be broken before long.Now wheres dads bike.

[Legend]

did a 9.855 with 1.70 60ft.I can,t see anyone going sub 1.5 60ft stock length.Without delving into the motor for compression,cams,head etc,let alone air shifter or lockup clutch.With a full weight 80+kg suited rider i can,t see anyone doing better than 9.5.In america stock, means stock bore only.Who cares, their are 4 of us in nsw in the 9,s now.2 in the 9.7,s and 2 in the 9.8,s.If it can be done you,re gonna see if i was right.My guess is the engine seals will be broken before long.Now wheres dads bike.

practise Glenn, practise!

Can I try your bike next time?

Leonard.

[Gnarbunkle99]

You show him Leonard!

[spamanglenn]

It may be a quick way to find out how fast it can go. Yeh my bike does 9.6,s......just not with me on it...yet.

[simmo]

[Prey]

Anyone in Aus done a 8sec 1/4 on a motor?
With normal mods exhasut etc

No boost or nos or big block.

What would it take stretched,lowered,air shifter.

Yo I've done a 8.06 run @ Calder, i've got a standard 06' Busa!!
What a struggle to keep the front down though!
If you can manage to do that you'll do 8secs easy!!!!
GO THE BUSA'S!!!!!!

[kawasuki]

Anyone in Aus done a 8sec 1/4 on a motor?
With normal mods exhasut etc

No boost or nos or big block.

What would it take stretched,lowered,air shifter.

Yo I've done a 8.06 run @ Calder, i've got a standard 06' Busa!!
What a struggle to keep the front down though!
If you can manage to do that you'll do 8secs easy!!!!
GO THE BUSA'S!!!!!!

Was that the 8th mile??

[spamanglenn]

yeh i,ve done a 9.8.Go the turbo diesel rodeos.

[simmo]

Anyone in Aus done a 8sec 1/4 on a motor?
With normal mods exhasut etc

No boost or nos or big block.

What would it take stretched,lowered,air shifter.

Yo I've done a 8.06 run @ Calder, i've got a standard 06' Busa!!
What a struggle to keep the front down though!
If you can manage to do that you'll do 8secs easy!!!!
GO THE BUSA'S!!!!!!

Prey you sure you don't mean 10.06 on a stock Busa

[Macbusa]

Yo I've done a 8.06 run @ Calder, i've got a standard 06' Busa!!
What a struggle to keep the front down though!
If you can manage to do that you'll do 8secs easy!!!!
GO THE BUSA'S!!!!!!

ummmm yeah... i think not for a 1/4 mile. 1/8th mile you mean?

[Macbusa]

yeh i,ve done a 9.8.Go the turbo diesel rodeos.

did it have a blow off valve mate.. and a fully sik intercooler...

[BLACKZOOK]

[/quote]
Yo I've done a 8.06 run @ Calder, i've got a standard 06' Busa!!
What a struggle to keep the front down though!
If you can manage to do that you'll do 8secs easy!!!!
GO THE BUSA'S!!!!!!
[/quote]


That 8 was done with a modified head - from all the times you were droped on it as a baby

[simmo]

Head first every time